The industrial destratifier is an essential solution for optimizing air circulation and reducing energy losses in high-ceiling buildings such as warehouses, workshops and industrial halls.

At Climatik , we assist French professionals in choosing air destratifiers suitable for heat recovery, heating optimization and improved thermal comfort .

Our range includes high-performance industrial destratifiers capable of moving 5,000 to 30,000 m³/h , effectively redistributing warm air accumulated at the ceiling to occupied areas.

These devices can reduce heating consumption by 20 to 40% while improving thermal homogeneity in industrial buildings.

Industrial destratifier technologies

Industrial ceiling air destratifiers

Ceiling destratifiers are designed to recover heat that naturally accumulates at height in industrial buildings.

In a heated building, warm air rises and can reach temperatures 5 to 10°C higher under the ceiling than at ground level . Destratifiers redistribute this warm air to the work areas.

Main characteristics:

air flow: 5,000 to 20,000 m³/h

consumption: 80 to 400 W

height installation: 4 to 12 meters

These devices create a controlled vertical airflow that homogenizes the temperature throughout the building's volume.

Main applications

Destratifiers are particularly effective in:

logistics warehouses

industrial buildings

production workshops

agricultural hangars

sports halls

stores and supermarkets

A single device can cover 150 to 500 m² depending on the building height .

Average investment: €400 to €1,500 per unit.

High-flow industrial destratifiers

For very large buildings or heights greater than 10 meters , there are high-power industrial destratifiers .

Characteristics:

These models can rapidly redistribute large volumes of warm air and ensure thermal homogeneity over very large areas.

They are often used in:

large logistics warehouses

aeronautical hangars

high-ceiling industrial buildings

sports centers

Advantages of industrial destratifiers

Reduced heating consumption

In a heated building, hot air naturally accumulates under the ceiling. Without destratification, this heat is often lost.

Destratification units allow this heat to be reintroduced into the occupied zone, significantly reducing heating needs.

Savings can reach:

20 to 40% energy savings

3 to 7°C recovered at ground level

Improved thermal comfort

Destratification allows for:

reducing temperature differences between floor and ceiling

eliminating cold zones in workshops

temperature stabilization in work areas

Employees benefit from a more stable and homogeneous thermal comfort.

Fast return on investment

Thanks to heating savings, the installation of destratification units generally offers a return on investment of between 1 and 3 years.

For example:

A heated warehouse of 1,000 m² can save several thousand kWh per winter thanks to heat recovery from high up.

Complementary to other ventilation systems

Destratification units can be combined with other equipment to optimize the indoor climate:

industrial fans for cooling in summer

air extractors for pollutant or smoke evacuation

industrial ventilation systems for regulatory air renewal

This combination creates a complete and efficient thermal management system.

Sizing a destratification system

Choice according to area and height

Area < 300 m² – height 4 to 6 m

1 to 2 destratification units

flow rate: 5,000 to 10,000 m³/h

Area 300 to 800 m² – height 6 to 10 m

2 to 4 destratification units

flow rate: 10,000 to 15,000 m³/h

Area > 1,000 m² – height > 10 m

4 to 8 high-power destratification units

flow rate: 15,000 to 30,000 m³/h

The distribution of units must allow for homogeneous coverage of the entire building volume.

Installation of industrial destratification units

Destratification units are generally installed under the roof or on the building's metal structure.

Installation includes:

fastening to supporting structure

Electrical connection

fan speed adjustment

Average installation time: 1 to 2 hours per unit.

These units can operate:

continuously during the heating period

or be controlled by a thermostat or automated energy management.

Climatik expertise

At Climatik, we carry out a complete study of your building in order to optimize heat recovery:

analysis of the volume and height of the building

study of heating sources

calculation of the number of destratifiers needed

optimal placement of devices

All our industrial destratifiers are available in stock with fast delivery throughout France.